Tammy Bast 2/22/21 Tammy Bast 2/22/21

Dealing with Pesky Loose Ends

I’ve been working with linen lately. I’m finding it slippery, unforgiving, and tricky as warp! The first time I warped and tied on just as usual. Everything went well until the first time I wound forward. Everything went loose! Next time I paid extra special attention to winding on and checking tension. Again, everything was fine until I wound forward the first time and again, everything went loose. Third time I tried using 2 heddles. I think I need to practice more with 1 heddle before I try that again!

Loose threads are not the end of the world. Those loose ends can be fixed. Today I’ll give 2 of my favourite tips for loose threads.

Have you ever warped, tied on, then found when the heddle is in the downshed all the lower threads are crazy loose? I find this happens most often with warps with little to no stretch…cotton, linen, silk. First thing, be sure when you are winding and tying on all the threads are even in the heddle (slots and holes should be side by side).

If you’ve done that and you still have a problem it is super easy to fix. Place the heddle in the down shed, place a shuttle or pickup stick in the shed behind the heddle. Slide to the back warp beam. Slide the stick back each time you wind forward. Problem solved!

2. Sometimes there are just 1 or 2 threads that are loose. You can pay extra attention to those spots while weaving to be sure your shuttle goes over and under the troublesome ends or you can fix the problem for good. Simply hang an s-hook on the offending end and let it hang behind the back warp beam. You can add extra s-hooks to give extra weight as needed. I generally add s-hooks to the first and last end when weaving with cotton. I find it helps keep my selvedges tidy.

These 2 tricks mean I never need to deal with loose ends…and neither do you!

Happy Weaving!

Tammy Bast 2/8/21 Tammy Bast 2/8/21

Hemming

A good hem starts on the loom. I think about my hem before I ever start weaving. I want both hems to took the same so the first thing I think about is colour. If my weft is all one colour, it’s easy, my hems will be the same colour. If I’m using multiple colours, I need to choose a colour. If I’ve used a border colour that will become my hem colour. Otherwise, I use the darkest colour, or white no particular, reason, just because.

I make a lot of tea towels and dish cloths. That means I also sew a lot of hems! This post will take you through my steps to making hemming easy so those towels don’t languish in the “need to be finished” pile.

The next thing I think about is cotton weight. Most of my towels use 2/8 cotton doubled. For my hems, I use 2/8 single even if the main weaving will be 2/8 doubled. This makes for a lighter hem that does not add a lot of bulk. My sewing machine thanks me! When I use chenille or boucle or slub I will still use 2/8 cotton if I have the right colour. I also press my weft in tightly…usually 15 threads for each inch woven. I weave 2-2 1/4” per hem. I do not hemstitch my towels ever.

I never warp just 1 towel, I always warp for at least 2, sometimes 4. Usually 2 because I can get bored with 4! Doing more than one towel means I need to know the end of one and the beginning of the next. I just weave in 2 picks of a contrasting cotton.

When I take my work off the loom, I take it straight to my sewing machine. I sew a straight stitch at either end to secure the weft. Then I will sew a straight stitch on either side of the contrasting threads. I’ll cut all ends leaving 1” or so hanging and trim the extra warp again, leaving about a 1” fringe. I do not cut my towels apart yet.

Next, it’s bath time. Tea towels and dish cloths are meant to stand up to hard wear. They get thrown in hot water and soap for a regular cycle, then dried on high.

Next comes pressing, which can be a whole post on its own. Pressing is literally pressing the iron on the work, hold for 15 seconds or so then pick up the iron and move it to the next spot. Don’t iron as normal, sliding the iron back and forth across the work, as you may distort the weave (straight lines may become wavy). While pressing, trim all remaining ends flush to work and remove any remaining fringe. You won’t want to, but press both sides. Cut the towels apart by cutting between the 2 contrasting threads and remove those threads.

Now finally we get to the actual hem! Flip towel to wrong side. Turn end over about a ½” and press. Turn again and press so that the raw edge cannot be seen. I try to line up the hem so it just hits the beginning of the actual towel. Press firmly. Repeat for the other side of the towel, being sure you are working with the wrong side up. Make sure your threads line up, particularly at the colour changes.

Sew hem with a straight stitch and press once more. I love my walking foot for this task. Alternatively, you can hand sew your hem with 2/8 cotton. Give your towels a final press

Hemming is a lot of work, but a well sewn hem can make or break a towel.

Tammy Bast 1/25/21 Tammy Bast 1/25/21

Lessons Learned from Yarn

As many of you know, my 2020 weaving challenge was colour. I needed to use more of it, particularly the bright colours. I didn’t just want more colours though, I wanted confidence to put colours together. I made a ridiculous number of tea towels. 2020 became the year of tea towels. Tea towels act as a perfect palette for mixing colours and if I wove an ugly tea towel, well, that would be one more tea towel for my kitchen! As it turned out, each one was my favourite, until I wove the next one!

Challenging ourselves is good. There were times however, when I needed a changeI needed something simple yet beautiful. Something I could do without thought and just allow my mind to be filled and soothed by the softness of the yarn and the richness of the colour. The kind of weave that allows me space to think, to process and to just be at peace in the moment. And that’s what we are looking for in our crafts isn’t it? Our craft grounds us so that when we go back into the world we can go peacefully, and bring that peace to others. We may not like what is happening around us but we can face it with calm determination knowing that our outward circumstances cannot rule our hearts. Whatever happens in the world, we can march out and meet it with the same patience we untangle a stubborn knot.

Which leads me to today’s post. I’ve learned a lot from yarn. In fact, weaving, or any craft involving yarn, can teach us much about how to live life.

1. Never fight the yarn

Knots happen. They seem to happen most often in the really expensive yarns. You know, the skeins you bought because you loved them so much but now you’re afraid to use? Those ones, they love to knot. Also, mohair. Untangling knots is a slow, sometimes tedious activity. But we all know that the looser we hold the yarn the easier it is to untangle. Once a knot gets pulled tight to can be impossible to untie. The best way to sort a knotty problem is to patiently, gently, tease the threads apart and always move in the same direction as the yarn. Gradually work away at the little knots, one at a time and the big snarl goes away. Keep your hands and your heart soft.

2. A little tension is good…too little and you create a mess, too much and things begin to crack.

Tension (or stress) is good, but not too much. A yarn under tension will not tangle. That’s why we warp and weave under tension. Just the right tension and everything works the way it should. Let things relax too much and you get a tangled mess; too much and things begin to break. Don’t be afraid of a little tension in your life. It will help keep you moving forward. And when things get to be too much, take a hot bath…hot baths relax everything!

3. Listen to the yarn…you cannot expect yarn to be what it was never meant to be.

Some yarns are stretchy, some are fuzzy, some are a little prickly. Some yarns work as warp and some just won’t. Take time to get to know your yarn. A prickly yarn will always be prickly, don’t try to make it be a soft neck warmer. Definitely don’t make a loose bulky yarn act like warp. Forcing yarns out of their comfort zones a little might yield some fabulous results…taking them too far can ruin something that might have been beautiful. Approach each project with an open mind, willing to listen and try something different if need be.

4. Don’t write off a yarn because of one bad experience.

Some yarns require a little more patience than others. Mohair for example. Mohair makes for delicate, airy wraps but many avoid it as warp. It is sticky, it is a challenge, but treated with just a little extra care it can work. A wider sett and just a little extra patience brings out the best in even the stickiest mohair. Then there’s boucle. Winding boucle on a rigid heddle requires a little more attention: even under tension it likes to tangle. But winding can be done easily by slowing down and “snapping" small bouts of warp as you crank and yank. Just a little bit of the right attention at the right time can make all the difference in the world!

I believe we all learn life lessons from whatever crafts we engage in. What are some of the things you’ve learned from your chosen craft?

Tammy Bast 1/11/21 Tammy Bast 1/11/21

Pick-Up Sticks will Explode Your World

I’m a big fan of plain weave. It is perfect for so many projects…hand painted warps shine, stripes in tea towels stand out and for a purely meditative weave, nothing beats plain weave. But have you tried pick-up sticks? They will explode your weaving world!

Pick up sticks weaving

What are pick-up sticks? Essentially, they are just like stick shuttles except they have rounded ends, or a point. The pointed end makes it easy to pick up some threads and go under others. When inserted pick-up sticks create an extra shed (or 2) so it’s possible to do more than plain weave. (If you don’t have any pick-up sticks shuttles work too)

There are 2 ways to insert pick-up sticks.

1. Place the heddle in the down position, this brings all the ends in slots to the top. Stand behind the loom slide the point over and under the threads as the pattern directs. It might be over 1, under 1; over 2 under 1; over 5, under 5, or any other combination.

2. Place the heddle in the down position. Working in front of the reed place the pick-up stick as the pattern directs. Turn the pick-up stick on its edge to raise up the threads on top, slide a second pick-up stick under the raised threads behind the reed.

I always use method 1 but my books all use method 2. Method 2 works well for those with back or neck problems who don’t want to lean over the back of their loom. Here’s a video because it’s so much easier to see than write!

Sometimes it can be difficult to see exactly which threads to go over and under. If the warp is dark, slide a white piece of paper in the shed after placing the heddle in the down position. If the warp is light, use a dark piece of paper.

Now that the stick is in place you have 2 new sheds to use! (Remember the shed is the space the shuttle slides through).

1. Place the heddle in the neutral position. Slide the pick-up behind the heddle and flip it on its side. When the yarn goes through this shed you will see weft floats.

2. Place the heddle in the up position. Slide the pick-up stick behind the heddle leaving it flat. This will create warp floats.

And that is all there is to weaving with pick-up sticks! And this is only the beginning! You can use multiple pick-up sticks to create incredibly complex patterns. Patterns using only 1 pick-up stick are simple, the stick can stay in place the entire weave. With multiple sticks they usually need to be removed and replaced each repeat. That’s when you might want to start using string heddles. (But that’s for another post!)

If you think you’re ready to try pick-up sticks, here’s a link to a pattern I use to teach beginner pick-up weaving complete with video links. https://www.therogueweaver.com/new-products/malabrigo-waffle-weave-scarf

Happy Weaving!

Tammy Bast 1/4/21 Tammy Bast 1/4/21

New Year, New Weavers

Welcome to a New Year! From what I’ve seen on social media many are embarking on weaving! I know you won’t regret it!! As a weaving instructor I see many new weavers and weavers who want to improve their weaving. There is lots of advice I could give, but today I’m going to keep it short and sweet: don’t beat so hard! That’s it.

This is a weft-faced fabric-meant to be dense with no warp showing

Experienced weavers know that what they see on the loom is not the fabric that will come off the loom and is not the fabric that will emerge after finishing. New weavers try to make the fabric on the loom look like the fabric they want when it comes off the loom. So they beat. Really hard. The weft is pressed so tight that nothing is getting through that fabric. When it comes off the loom and is finished a very dense stiff fabric results (and they have used way more yarn than they anticipated, or the pattern called for). I know this from personal experience!

Here’s the non-technical theory behind weaving. When you weave, the warp is under tension (stretched out). This allows the fibres to move up and down easily and create nice sheds for the shuttle. When the fabric (it’s actually called a web at this point) is cut off the loom, all the tension is released. So if you wove 80” on the loom, it might only measure 72” off the loom as the fibres go back to their natural relaxed state. This will vary depending on the fibre.

After you have taken the work off the loom, it takes a hot bath. This relaxes the fibres even more, and with agitation, fulling can occur. Fulling draws the fibres closer together creating a stable fabric. So now your 72” piece might only measure 65” (again, this will vary depending on the fibre)

In order for this to happen, the fibres need to have room to relax and move.

Here’s a couple tips to help you out:

1. Keep a tape measure handy. A balanced weave (good for beginners to practice) will mean that you have the same ppi (picks per inch) as epi (ends per inch). So if I am weaving a scarf on a 7.5 dent reed I should have 7.5 weft threads per inch of weaving. Check you work often with the tape measure. Especially when you are coming back after a break.

This is the same project as above after finishing-no holes!

2. Pay attention to how you draw your heddle forward. If the heddle is tilted towards you, you cannot see the weft being pressed into place. If you tilt it a little away from you, you have a great view of what is going on and have a little more control. You should be able to see through your work easily. Here’s a little video https://www.instagram.com/tv/CI6xZN-JWLQ/?utm_source=ig_web_copy_link

I hope this is helpful to the new weavers out there! Follow me on facebook or Instagram to find out when new blog posts are out. This year I plan to cover some beginner tips (things like edges, pick up sticks, and project planning) as well as delve deep into double heddle weaving, and, just because I can’t control myself, there will be some inkle weaving, tablet weaving and floor loom weaving. I’d also love to cover topics you are interested in, so if there is something you are looking for, please let me know!

Tammy Bast 4/18/20 Tammy Bast 4/18/20

Colour Adventure

This will not be a post about colour theory or how to put colours together or even how colours work in weaving. Because I’m really not good at putting colours together. I’m better than I used to be but I’m really conservative in colour choices. Usually I pick a variegated yarn and pair it with a solid colour that appears in the variegated skein. Lately however I’ve been pondering Noro yarns.

Tea towels are my favourite experimental projects so I decided to try putting colours together. I’ve also been fascinated by the table cloths at a local restaurant…lots of bright colours in no seeming order. So I decided to warp my floor loom for table runners and placemats, and my rigid heddle with tea towels. I knew I wanted 8 colours for my floor loom so I gathered all my 4/8 cotton and started playing. I lined them all up and picked my favourites. Then I took out the ones that seemed “wrong” and added some that looked “right” . I looked for a balance of light, dark and made sure I had a bright pop. I shuffled the order, checked colour scale, added, took out, wished for another colour, determined I did not need to buy more and rearranged some more. It was fun! And I‘m really happy with the results. I even did a little sample to try a couple different weft colours!

After success on the floor loom I found choosing colours for the rigid heddle much easier. This time I gathered all my 2/8 cotton and picked a main colour. The main colour sandwiches each of the other colours so it was easier to pick colours. Again, I lined everything up, added, took away (and wished for more colours). This time when I warped I did it completely random. The blue main colour was the constant, everything else was random. Again, I love the result! I will certainly be trying to more!

So the lesson? Be brave with colour, play and just have fun. It is just string after all!

Tammy Bast 3/6/20 Tammy Bast 3/6/20

Mohair for Warp?!

I’m on a few weaving groups on Facebook as well as following a number of rigid heddle weavers on Instagram. As I read the posts I learn a lot, some I agree with, some not so much. One idea that seems to be coming up a lot lately is mohair. Specifically, that one should not use mohair for warp. I must disagree!

I know why weavers believe this, I’ve experienced why weavers, after 1 attempt at a mohair warp swear never again, but I love the effect of a mohair warp. I love the light airy feel. I love the drape. I love the warmth. I love how far just a little bit can go. So, here are my tips for using mohair as warp, and a free “pattern” to make your own mohair wrap.

Use the right hedd!e. Mohair is sticky. If it is too close together you will have problems. I usually use my 7.5 (for 1000m/100g) or 5 dent (500m/100g)
Place an extra shuttle or pick up stick behind the reed as follows: with heddle in the down position place shuttle in the shed behind the reed. Slide shuttle as far back as possible. This shuttle will stay in the work for the entire project. I find the down shed is usually the stickiest. The shuttle helps and if it is too sticky and you can’t get a clear shed: just slide the shuttle forward, flip it in its edge and voila!
Be prepared to spend extra time. Weaving with mohair does require a little extra patience. You will need to check to ensure the shed is clear before passing the shuttle through. You will probably spend time hand picking some threads apart. You may need a few s hooks to help with tension issues. You will need to be extra vigilant to ensure the right number of picks per inch.
After winding the work forward, place the heddle in the up position and spend a few minutes making sure there are no tangles behind the reed. This will make it easier to keep the up shed clear until you wind forward again.
Finally, have fun, try some lace or finger techniques. Mix and your warp, most of all, don’t be afraid, it is after all, only string!

I promised a free pattern. It’s not really a pattern because it is so easy, but here it is:

You will need a 7.5 dent reed and a mohair and silk blend (I use Zambezi by Fleece Artist/Handmaiden but Rowan Kidsilk Haze will work just as well. (Or any other mohair silk blend that is 1000m/100g)

Warp measures 100” (2.5 meters) Warp as wide as you like or your loom can handle (1000m will warp and weft 100” x 32”) Tie on in small bundles. I like to tie little bows because they are easier to untie at the end. Plus, they are so darn cute!

Weave at about 6 picks per inch. It really looks like a window screen as you are weaving!! (remember the tips above)

Hemstitch the ends in bundles of 4, alternatively, or if you forget to hemstitch, knots in bundles of 4 look like little beads (ask how I know!) Don’t worry about the spaces between bundles…they will wash out, I promise!

Weave until you can weave no more (about 84”)

Cut off the loom and tie fringe in large loose bundles to prevent tangling. Soak in very hot water (I use my washing machine). Spin out the water and dry on high heat for 5 minutes. Untie bundles and press with a hot iron set for steam. Trim ends and enjoy!

PS If you would like to order an already made wrap, please contact me!

Tammy Bast 1/6/20 Tammy Bast 1/6/20

Back to Blogging

In my last post, way back in June, I said I was going to take a break from blogging to focus on actual weaving and selling. I took a longer break than I originally intended and here’s why:

In my last post, way back in June, I said I was going to take a break from blogging to focus on actual weaving and selling. I took a longer break than I originally intended and here’s why:

I was enjoying the actual weaving so much that I was having trouble motivating myself to write. It’s true, I love weaving! And I got so much done. You’ll see my work in the next issue of Little Looms and in the fall edition of Handwoven. (I do like writing, I just like weaving more.)

2. I spent time weaving in public. It takes 4-6 hours to write, edit and publish a blog post, essentially, most of a day. I took that time and wove at Gaspereau Valley Fibres instead. So, on my days off from working at the store, I was at the store weaving, showing people what can be done on a rigid heddle, selling finished items and generally having a great time!

3. I created new patterns. I am not a production weaver and I have no interest in weaving the same thing over and over. I have a few patterns I come back to, but mostly I want to keep trying new things. I did get a couple patterns written, you can find them here: https://www.therogueweaver.com/new-products/summer-lace-shawl-pattern and here: https://www.therogueweaver.com/new-products/multi-purpose-cotton-cloths. I also have a few more to write.

4. Finally, at heart I am a social person. I like interacting with people. With a blog it can feel one way. Which is ok, I’m good with doing all the giving…if I feel what I’m giving is being received! It’s hard to know on a blog…so if you are out there let me know what you want to read about!

So I'm back. It might not be every week, but I am aiming for at least 1 post a month. I'll let you know what is going on in my weaving life, what I’ve learned, and of course, why weaving is so awesome!

Follow me on Facebook or Instagram to find out when a new post is out or just to see what is on my loom.

Happy Weaving,

The Rogue Weaver

Tammy Bast 6/21/19 Tammy Bast 6/21/19

Hobby, Hoarding or Business?

I weave a lot. I mean A LOT. When I’m not working I’m weaving. Which means I have a lot of weaving in my house. My scarf drawer is overflowing, I have enough tea towels to last past forever, I have blankets, curtains, floor mats, pillow covers, and clothing. Really, if it can be woven I’ve got it or am planning to have it. I told my husband a few weeks ago that I either needed to start seriously trying to sell my weaving or quit. I’m getting close to crossing the line from hobbyist to weaving hoarder. Seriously.

I can’t see myself quitting so selling it is! I am incredibly lucky to work at a yarn shop part-time (Gaspereau Valley Fibres). But for those of you who know the shop, you will be seeing a lot more of me there …I’ll be hanging out on my days off, weaving! I did my first Friday and Saturday this past week. It was so much fun talking to people about weaving, showing them how it's done and encouraging them to join one of our beginner weave classes. Plus, I had a helper…our shop cat, Mittens, wanted in on the action. And, I even sold a couple of scarves!

I’ll still be writing blog posts, but maybe not quite as regularly over the summer (because I’d rather be weaving!) But you can keep up with what I’m doing by following me on Instagram @therogueweaver, or my Facebook page: The Rogue Weaver. Everything will be for sale at the store but if you see something you like let me know, I can ship.

It's going to be a fun summer!

Here are a few of my favorites currently at the store.

Tammy Bast 6/7/19 Tammy Bast 6/7/19

Lessons from the Loom

There is nothing earth shattering about learning life lessons from hobbies but I have been a little surprised by some of the lessons I have learned and am still learning. while weaving. This is the first in a sporadic series of lessons learned at the loom. I wish I’d learned some of these lessons earlier in life!

Mistakes: we all make them. We all hate making them. I hate making mistakes so much that I can be paralyzed. Or, I can be so afraid something might be a mistake that I do nothing at all. I don’t want to offend, I don’t want to hurt and I don’t want to look stupid! So it can be more comfortable to deal with the disappointment of not doing something than taking the risk of making a mistake.

I’ve made mistakes in my weaving. Little mistakes that don’t really matter like colours that didn’t work, beating too hard, poor choice of fibre for personal projects. And I’ve made some bigger mistakes: wrong beat for a piece for publication, forgetting the “checkers” in a checkered scarf, tension issues. Here’s some of what I’ve learned about mistakes.

Change perspective. Sometimes a mistake isn’t really a mistake, it’s learning how not to do something. The long term consequences of these “mistakes” are actually positive so they can hardly be called mistakes. We can’t expect to be perfect when learning new things, so be nice to yourself! A simple change of perspective can have a huge impact on how you feel about yourself. The picture on the right was supposed to be a double weave log cabin. A mistake in threading turned it into houndstooth instead.

This was completely taken apart and rewoven

If you’re walking down a path that is not leading where you want to go, turn around. If you keep walking you *might* get to where you want but it would have been much easier if you had turned back at the first sign of trouble. I am amazed at how far back you can go in your weaving to fix a mistake. I have actually unwoven a completed project, tied it back to the loom and rewoven! The crazy thing is I knew from about the first 6” of weaving that I was in trouble. But I keep going hoping that the finishing would fix the issue. It didn’t (of course). Turning back doesn’t mean giving up, it means recognizing there is a problem, going back to the point it was made, fixing it at the source then moving forward in the right direction.

This might look good in a picture but the tension was a disaster…I cut my losses

Cutting your losses is not failure. Sometimes you can turn a mistake into a positive learning experience, sometimes you can turn back and fix the mistake and sometimes there is nothing to be done but cut the project off the loom. This is not a failure, this is self-care! There may be a sense of sadness over the loss of beautiful yarn, time or money but the sense of relief is greater. In life, cutting something away and tossing it out of your life might be very painful and at the same time the best thing you could ever do for yourself!

Tammy Bast 5/31/19 Tammy Bast 5/31/19

Keeping Things Simple

In weaving, as in life, is can be tempting to make things much more complex than they need to be. At least for me. I find keeping things simple can get a little boring. Why do the simple thing when you can do the much more complicated thing? This philosophy has been the primary contributor to numerous unfinished projects in my life. The thing about complicated though, is that as you progress, the complexity can grow exponentially. Especially if you are just working from ideas in your head! It’s taken a long time, but I’m beginning to learn that sometimes, the simplest thing is really the best.

Each summer Interweave puts out a call for submissions for Little Looms, a special edition of Handwoven and a magazine especially for rigid heddle, inkle and pin looms. I’ve submitted a number of pieces and have had three pieces accepted. When I choose which pieces to submit, I think about the complexity of the project. Not because I want to show off but because I want to show what a rigid heddle can do and encourage people push the limits. I was very surprised and pleased to see my Mermaid Wrap on the front cover. Particularly as its’ submission was an after thought.

This past summer I sent in a double weave blanket, a log cabin scarf, a twill poncho and a 3/1 lace checkered scarf. All are rather complex patterns. As I said, submitting the Mermaid Wrap was really an after thought. I love the scarf, it is so beautiful but, I thought, too simple! I didn’t do anything; the yarn did all the work. I was convinced to send it in after seeing the cover of the Handwoven May/June 2018 edition. The front cover features a gorgeous travel wrap by Debra Jarchow…in plain weave. So simple yet so gorgeous. So, I sent it in and was pleasantly surprised when it was chosen (along with my Classy scarf with 3/1 lace).

Lesson: just like people, yarns have voices and personalities. Some yarns want to fade into the background and are happy to let the pattern, texture or another yarn shine. Other yarns have a big personality. They want (or need) to be the centre of attention. This is shown so well in these two patterns. In the classy scarf, the Sabri yarn by Illimani, is lovely. It has an incredible drape but is understated. The texture draws the eye more than the yarn itself. Sabri is a quietly confident yarn, quite content to be the supporting actor to lace. Handmaiden’s Maiden Hair on the other hand, draws every eye as soon as it walks into the room. Trying to pair it with another attention seeker would be disaster!

In a way, a weaver is like a movie director with the yarn as characters. Our job is to cast the right characters and show them to their best advantage so that even complicated looks simple. Sometimes we must be quiet and let the yarn speak.

Tammy Bast 5/27/19 Tammy Bast 5/27/19

A Weaving Do Over

Sometimes the only way to learn is try and see what happens. A favourite phrase from me to my children as they were growing up was, “what is the worst that can happen?” They found it a particularly unhelpful bit of advice. It certainly isn’t advice suitable to every situation, but for the little things it can help keep things in perspective. I know most of us worry a lot. And worry can stop us from trying something that we might really regret later. So, thinking about what the worst thing that can happen can spur us on. If we can cope with the worst-case scenario, we should go for it! (Besides, the worst-case scenario hardly ever happens!)

The thing about weaving is that if it doesn’t work you have only lost some string and time. And, you can always have a do over. Almost 2 months ago I did a post ab )out Boucle and Chenille. Click here to see post: www.therogueweaver.com/blog/2019/4/5/boucle-and-chenille It was a post about risks and me not liking them. In it I mentioned that chenille tends to worm. Here’s an update on my chenille towels. I have used these 2 towels exclusively as hand towels in the bathroom. We have 4 people living in the house, 2 of whom work from home so are home (obviously) all day. These towels see a lot of use and have each been washed at least once a week, sometimes twice. The plain weave towel is standing up reasonably well. It has no worming, but it seems to feel a little thinner and it is quite stretchy. The waffle weave, well, you can see from the pictures that it hasn’t stood up so well. However, it has only wormed badly at one end…the end I started weaving from and wasn’t beating as hard. The other end has worn quite well. (That was sett at 10 epi and 15 ppi)

Overall however, I think they can be better. I’ve done a little more research and actually found a floor loom pattern that uses chenille. It recommends a sett of 16 epi for a scarf. So, I went back to my loom: I really want chenille bath towels. I could have been patient and waited until I had my current project off the floor loom, but I also really want to do these on the rigid heddle. I have a 15-dent reed but I’m really not sure that the chenille would fit through the holes, so I used my 12.5 instead.

Again, I wove 1 in plain weave and the other with warp floats. As you can see from the picture at the top and bottom, I also alternated my warp floats hoping this would give a little more structure and help reduce worming. Since using pickup sticks would require replacing it every 5 picks, I used string heddles for the first time. At such a tight sett and fuzzy yarn, it was a challenge but so worth it! I’ve washed these and just need to hem them. The plain weave feels like velvet, still a little thin for a bath towel but lovely. The one with warp floats? Oh. My. Goodness. It feels so good: soft and velvety. So much nicer than the purple waffle weave. Which I think is odd. The waffle weave, at a looser sett feels a little stiff, but this new one has no stiffness at all, just velvety softness! Now I just need to hem them and put them to use. If they wear well, I’ll make some bath towels, if not, I guess it will be back to the loom!

Tammy Bast 5/17/19 Tammy Bast 5/17/19

How to Nurture a Relationship that Lasts (with your Rigid Heddle) PT 4

This is my last post on this topic. So far we have looked at choosing the right loom, care and feeding of our looms and our own attitudes. This week is about developing ourselves. Our rigid heddles have so much potential but if we don’t develop ourselves, we will never begin to unlock that potential.

How can we develop ourselves?

1. Read books, magazines and articles.

My favourite rigid heddle weaving books are: The Weaver’s Idea Book by Jane Patrick and Inventive Weaving on a Little Loom by Syne Mitchell. Both contain patterns, but what I like best about them is the number of different types of weaving and the pictures. They cover colour and weave, mixing textures, pick up sticks, string heddles, using 2 and even three heddles and so much more!

Interweave puts out a magazine each year Little Looms (My scarf is on the front cover of this year’s edition!!) and it is filled with patterns for rigid heddles, tapestry looms and pin looms.

I love Pinterest! Search rigid heddle and there are tonnes of ideas, articles, blogs, and pictures that come up.

2. Hang out with other Weavers

Your area may have a weaver’s guild. Or maybe there is an informal group that gets together, maybe at a home or your local yarn shop. You can learn so much from talking to other people or just watching. If you can’t find weavers near you, try hanging out online. There are facebook groups that are just for rigid heddle weavers and they are a fount of information! I belong to a group called “Rigid Heddle Looms” and it has 5.5k members who are scattered all over the world. That means that anytime I have a question someone in the world is awake and can give an answer!

Sometimes you will run across people who are very adamant about “right” and “wrong” ways of doing things. Take all advice with a grain of salt. There are always multiple ways of doing the same thing. Take advice, try lots of different things then do what works for you even if it is absolutely the “wrong” way. If it gives you the end result you want, it is the right way for you. There are no weaving police!

3. Take classes

If you have the opportunity to go and take a class with a real live instructor do it! Even if it is project based and you aren’t in love with the project you will learn something. Live instructors will be able to answer your specific questions, see what you are doing and suggest easier ways, new ways or even tell you when you can skip a step! In addition you will meet other weavers, who may live near you, who will now be your friends! And they will have helpful ideas too. Don’t be afraid to ask your local yarn store if they can have a class on a specific topic (pick up sticks, double weave, colour theory…whatever) Chances are if you want it, others do too. Or if you pull a whole group together the store will (probably) happily oblige if there is an able instructor.

Online classes are excellent too. You get to learn from the best instructors. They will endlessly repeat themselves and remain cheerful. Sometimes in person classes can be overwhelming and you forget half of what you learned by the next morning, online classes can be watched over and over again.

4. Don’t be afraid to try new things

Remember, it is just string. If your project doesn’t work, it isn’t the end of the world. If you aren’t sure and can’t afford the loss try new techniques with less expensive yarn first. This helps you learn the skill, but it won’t finish the same so is only good for technique. I often try new patterns with cotton. It’s inexpensive and regardless of how it looks, I will have a usable tea towel! If you are sure of the technique but not sure how the fibre will finish buy a little extra and weave a sample.

In conclusion, developing a lasting relationship with your rigid heddle isn’t much different from developing lasting relationships with people…Take the time to get to know each other, give them what they need to thrive, don’t expect what they are unable to give, adjust your attitude when needed and work on yourself!

Tammy Bast 5/13/19 Tammy Bast 5/13/19

How to Nurture a Relationship that Lasts (with your Rigid Heddle) PT 3

We’re continuing my series on How to Nurture a Relationship that Lasts (with your Rigid Heddle). This week we are going to look at attitude and the first thing I want to say is that weaving on a rigid heddle is real weaving! I hear many people say that they have “just” a rigid heddle, like they are somehow “lesser” weavers. This is absolutely not true! A rigid heddle is a real loom that real weavers use to produce real weaving. Never put yourself or your loom down! Now, let’s look at some truths about rigid heddle looms.

1. A Rigid Heddle loom is not a “beginner” loom (although it is perfect for beginners)

While weaving on a rigid heddle may result in you also acquiring a floor loom, getting a rigid heddle because you can’t afford/don’t have the space/want to try weaving before making the investment in a floor loom/ will leave you with a desire that your rigid heddle will never be able to satisfy. Rigid heddles and shaft looms are as different as knitting and crochet. You may love one and hate the other. If a floor loom is what you really want, get one, there is one for every budget and space constraint.

I use both my 32” rigid heddle and my 36” floor loom in a 9’x8’ space.

2. Expect great things from your rigid heddle and it will deliver

This is a double weave using a pick up on the top layer, plain weave on the bottom

Rigid heddles can do far more than plain weave. Add in pick up sticks, string heddles, multiple heddles and varident reeds and the possibilities are endless. A rigid heddle can do patterning that just can’t be done even with a multi-shaft loom as well as twill, deflected double weave, overshot krokbragd, and even tapestry weaving. Additionally, yarns that aren’t suitable for the high tension of a floor loom can work very well on the rigid heddle. Rigid heddles are perfect for single skeins of hand painted yarns as there is so little waste. And you can weave yardage to sew with! Weaving can sometimes take more time than on a floor loom but the ease and speed of warping more than make up for it.

3. Don’t expect the loom to do what you should be doing

It is rarely the fault of the loom when projects don’t turn out as expected. Warped well a rigid heddle has a good shed (big enough to use a boat shuttle with plain weave, though I don’t always recommend using one). Be sure to use the right reed for the yarn (a floor loom allows for flexibility using the reed substitution chart, but not a rigid heddle). If you want nice selvages you will have to practice. Tension is important. Poor tension results in a less than fun weaving experience. As mentioned in a previous post, use the best fibre you can afford…a bad fibre cannot produce good fabric. I’ve only cut off projects before completion twice. Once because I used yarn with too much stretch to get a good tension (because it was cheap enough to experiment with and I didn’t know better) and the second because I had poor tension due to mistakes I made warping. Nothing that has ever gone wrong (fabric too dense, too loose, ugly etc) has ever been the fault of my loom.

To sum up, love your rigid heddle loom for what it is, not what you wish it was. Don’t overlook its’ potential: challenge it and yourself, experiment, and have fun! Below, from left to right: double weave log cabin, plain weave sewn into a shirt, twill sampler using two heddles and rosepath twill using two heddles

Tammy Bast 5/4/19 Tammy Bast 5/4/19

How to Nurture a Relationship that Lasts (with your Rigid Heddle) PT 2

Last week we discussed choosing the right loom. This week is about providing your loom with what it needs to thrive. It might be your loom’s responsibility to please you, but it is your responsibility to provide it, and you, with the proper tools and equipment. A new loom package will give you everything you need, except the yarn, to get started with basic weaving.

Care and Feeding

It can be tempting when starting new hobby to minimize expenses. After all, you may not like it. But I guarantee you won’t like it if you don’t have the right equipment! Trying to weave on a 32” loom without a stand will cause you physical pain and you’ll start to associate weaving with pain. Not getting the size reed to use the yarn you really want to use will leave you feeling dissatisfied with your finished products. And using poor quality fibres can create so many problems that you dread going to your loom. Skimping can sabotage a potentially beautiful relationship. Besides, for most of us it is psychologically less painful to drop $600 in one fell swoop and have everything we want/need than to be continually spending $100-150 while still feeling there is more we need to be really content.

What else should you get?

1. A stand is a must if you are getting a loom bigger than 24”. If you are getting less than 24” I still recommend a stand because it makes warping so much easier. If you or someone you know is handy go ahead and build your own…but remember that the designers of the stand for your loom have had lots of experience and know what height and angle is best and how to balance it so it isn’t prone to tipping!

2. Extra reeds. Think about the yarns you want to use and the projects you want to weave and get the right reeds. The 7.5 or 8 dent reeds that many looms come with are great for dk and worsted weight yarns. 10 dent for sport and fingering, 4/8 cotton, or 2/8 cotton doubled; 12.5 for fingering; and 15 for lace. At the other end, a 5 dent is good for aran/bulky and a 2.5 for super bulky. You might also consider getting 2 of the same size so you can learn double weave to either weave wider blankets, get the sett you want (2 10 dent reeds allow you to weave at 20 ends per inch) or weave twill.

3. Extra shuttles of various sizes. Just because you have a 32” loom does not mean all your shuttles should be 32”. The shuttles should be just a little longer than your project is wide. It’s just more comfortable. Using a 32” shuttle takes a lot of shoulder energy and can be tiring so if you are working on a 12” scarf, using a 14” shuttle is much more comfortable.

4. Pick Up sticks…these are like shuttles except with points on the end. They make it very easy to create complex looking patterns.

5. A couple good books and classes. I’m a fan of in person classes over online classes simply because a live instructor can personalize to you specifically. S/he can see what you are doing and give tips specific to you. Plus you will learn from the others in the class and perhaps meet new, local, friends! That being said, online classes do have benefits…you can do them at your convenience, repeat as many times as you want and have very experienced teachers.

6. Good quality fibres that you love! Life is too short to use ugly yarn. This is your hobby and you should enjoy every moment spent at your loom. Don’t sabotage a potentially beautiful relationship by using poor quality yarn because it’s cheap. Get the best you can afford, something that feels nice in your hands and gives you pleasure just to look at. Even for beginner projects, maybe especially for beginner projects! Your first projects may not be perfect but if you hate the yarn, can’t stand the feel if it or it's a mess on the loom you will begin to associate weaving with negative emotions. First impressions are important!

Fun and Handy Extras

There are always a few things that you don’t really need, but they definitely add to the ease and enjoyment of weaving.

1. Varident reed: this is pretty cool. It’s a reed with pieces of reeds of all sizes that you can put together in the order you want to use any weight yarn in one project. Great for using up all those little bits of leftover yarn.

2. Fringe twister: another very cool gadget. Just clip, turn and tie and you have a beautiful twisted fringe. Untwisted fringes tend to look a little tattered over time.

3. Extra warping sticks: if you plan to weave lots of yardage, these will come in very handy.

4. A portable light that will clamp onto your loom. It’s always nice to have good light!

Just a quick note about buying used looms. This is a great way to get a fantastic deal. Before you buy, make sure all the pieces are there, that the loom holds tension and that you can get parts if you need them (extra reeds, double heddle kit if it isn’t built in, stand if you want one etc). It’s not a deal if you can’t use it.

I hope if you are considering a loom, or are a beginner weaver, you have found this helpful. If you are not a weaver, and you’ve read this far…wow! Thanks! Here’s my words of wisdom for the week: Life is always easier with the right tools (whether it’s a skill to learn or a physical object). It’s worth learning what they are and acquiring them. So many times we “make do” and struggle, but if we used the right tool (or skill) the job would have been done faster and better, with less grief, and we might have enjoyed it! I don’t believe we need to buy everything, on the contrary I believe we should buy less. Borrow when you can, share what you have. But when you do buy, buy the right tool. You will enjoy life more!

Tammy Bast 4/26/19 Tammy Bast 4/26/19

How to Nurture a Relationship that Lasts (with your Rigid Heddle)

It’s hard starting new relationships. They take time and effort. You have to set boundaries and learn the other person’s boundaries. It can be a bit of an uncomfortable shuffle during the first little while, then suddenly it becomes an effortless dance, like you’ve known each other forever.

Building a relationship with your rigid heddle is the same. It’s hard work learning a new language, new movements and boundaries. And then, after failures, frustration, maybe even tears, everything falls into place and weaving is second nature. Over the next few weeks I’m going to give some tips and advice about how to develop a relationship with your rigid heddle that will last a life time.

Pick the right loom

When choosing a loom, you should do your homework. Just like you won’t like everyone person you meet, you won’t like every loom. While all rigid heddle looms operate in much the same way, they have distinctions. Some fold, some have permanently attached rods, others are removable. Reed sizes vary with the brand of loom. Some come finished in a choice of gorgeous finishes, others are completely unfinished.

Think about what you want to make before you choose your loom.

If all you ever want to do is weave narrow scarves with dk weight yarn a 10” Cricket by Schacht or the Ashford Samplit might be perfect for you. But if what you really want are tea towels and wraps, these looms will bring more sadness than joy. Think about the width and length of what you want to make. Sure, a 16” loom with a double heddle kit can weave 32”, however if you plan to make a 32” baby blanket for every baby born to anyone remotely connected to you, you would be happier with a 32” loom right from the start.

Talk to other weavers and visit your local yarn store that carries looms.

People who weave are a great resource. We love being invited to talk about our passion (we’re used to being asked to stop talking). Tomorrow, April 27, is LYS day, here’s my plug: Local yarn stores care more about you being happy with your purchase than the amount of money you spent. Your local store might have looms you can try. You can ask about why one loom over another. Describe what you want to make and they can prescribe the right loom. If they don’t have the one you want, ask if they can get it (and ask why they don’t carry it, there might be a really good reason!) Ask about the price of accessories. Ask how easy it is to get parts. And when you buy your loom from a local yarn store you can feel great about going back to them for help and advice. In addition they may offer services such as assembling your loom, patterns, help reading patterns, choosing the right fibre for your project and whatever else you might possibly need (including advice about any life issues you might be experiencing completely unrelated to weaving) all free! And we want to see your finished pieces, honestly! We feel a little like midwives, helping dreams come to life. We love to see the end result. Please, come and brag about your projects so we can celebrate with you. And we’ll genuinely commiserate with your *ahem* not so successful projects.

Tammy Bast 4/20/19 Tammy Bast 4/20/19

Dressing the Loom Pt 2

Last blog post I explained how dressing the loom should work. It seems a long process, but pretty straight forward: wind the warp, take the warp to the loom, wind, thread, tie and weave. It’s never that easy for me. Have you seen those videos showing 1 parent trying to dress twin toddlers? That’s me warping my floor loom. The real lessons to be learned in this post are that there is no right way, just easier ways! Mistakes can be fixed and weaving requires persistence, patience and creativity.

I’ll be honest with you though: my warping issues are all my own fault! I was getting pretty good at it, then I decided I should try to warp front to back. The books say you should try both ways (back to front and front to back) and find what works best for you. So I did, and did everything wrong!

My first mistake was winding a warp for a tartan starting after 10 pm. Tartans are particular…the colour order and the number of each colour are important. And the Nova Scotian Tartan has 6 colours. With all the repeats of blocks it is really easy to get confused or miscount. I did both! Fortunately these are not very serious mistakes, I just wound a few extra ends to add in before winding.

Winding didn’t take too long so I decided to go ahead and start putting the warp on my loom…and try warping front to back. (I usually wind back to front and am pretty good at that!) I got out my book (Learning to Weave by Deborah Chandler) and was very determined to follow it step by step. Except, after sleying the reed I realized it was really uncomfortable trying to work from behind the loom and there was no way I was going to be able to thread all the heddles from back there. So I wound the warp onto my back beam. It was a very smooth winding onto the back beam. I might keep doing this for narrow warps. Then I went to bed.

When I came back to my loom I had to decide how best to proceed. Since I planned to warp front to back my cross was gone. My threads were all in the right order because they were in the reed, but now they needed to come out of the reed to go through the heddles and back in the reed. It’s much easier to see to thread the heddles if the reed is removed and I can sit closer to the heddles. This time I needed to pull a few threads out of the heddle at a time and thread the heddles. And it was during this process I made and discovered a few more mistakes.

2 Threads make a difference! Also, extra threads in the reed makes wavy lines.

First, I was threading 1,2,3,4. Very simple. Can’t possibly mess that up, right? So I didn’t do any of the things I usually do to prevent and catch errors. Big mistake. After threading all the heddles and then going back to check I found multiple mistakes. All of which would have been caught had I not gotten over confident. Second, I found all the mistakes I made in winding the warp! (note to self: don’t wind a complex warp late at night, ever) You’ll see I’ve got several bunches of warp hanging off the back of the loom and weighted as well as threads crossed in the back so they are in the right order on the front. Finally, I just wanted to get weaving so when I found I had threaded 1,2,1,2,3,4, I just unthreaded and tossed the first 1,2 off the back. 2 threads make a difference! It will be fine for a sample, but I’ll need to add those 2 threads back and rethread the heddles for the next scarf.

Tying on went well…except I forgot to check my reed. (Did I say I just wanted to get weaving?) It’s amazing the difference missing a dent makes in weaving. In a tartan that 45 degree angle is important and having an extra thread in the reed or missing a dent makes a noticeable difference.

So, this is a sample piece! I’ve worked out the kinks, tried a couple different ways of changing colours and learned a lot. The next piece will be a 72” official Nova Scotian tartan scarf. On a side note, did you know that one must be licensed to produce and sell the Nova Scotian Tartan? I’m currently in the process of getting a license so I will have scarves and tea towels for sale soon!

Tammy Bast 4/15/19 Tammy Bast 4/15/19

Dressing the Loom

For a non-weaver this may seem a bit technical. I want you to be able to understand the process of weaving for two reasons: 1. So you can appreciate it more when you see it; and 2. So you can shake your head at me and laugh when you read my next blog post! If you are a weaver this is going to sound over simplified but hopefully you can use this to educate your non-weaving friends or customers about the hidden work of weaving.

Floor looms do take a lot of work to dress (the term used to describe the process of getting the loom ready for weaving). Once the yarn, pattern and draft are picked -this can be a project all by itself- the real work begins.

Winding the warp

Winding the warp consists of wrapping the yarn around pegs on a warping board in the right colour pattern. The warping board is used to measure the warp and ensure all the threads will be the same length. Wrapping with a cross allows the weaver to know which is the next thread in the sequence when threading the heddles or reed. It is really important to secure the cross well.

After winding the warp the yarn needs to get from the warping board to the loom without becoming a huge snarly mess. Lots of choke ties get tied, especially at the cross. Then the whole mass can be chained (like a crochet chain).

Winding the warp can take anywhere from an hour to several hours.

Next you can start dressing the loom.

I usually warp back to front. I start by putting sticks in my cross to make sure I don’t lose it and attaching those sticks to my loom. Next I spread my warp in the raddle (my raddle is a piece of wood with nails every inch) and wind the warp onto my back beam. As I wind my warp I undo the chain that stops my warp from tangling. I wind around heavy paper to keep an even tension. (Handy tip: the tubes from wrapping paper unroll to make excellent warp packing material) Winding well is incredibly important. You need the warp to go on with an even tension. I regularly go to the front of the loom and tug on the warp to keep things even. A tension problem here will cause problems through the whole weaving process.

Once the warp is wound on it’s time to thread the heddles. Threads are threaded through the heddles in the order of the draft chosen. Each thread is taken, in order, from the cross and threaded through it’s own heddle. It’s slow, sometimes painful if you don’t stretch enough, and frustrating if you make a mistake. It definitely pays to slow down here and double and triple check. Again, this process can take several hours or for a really fine wide warp, days.

Next, each thread needs to go through the reed. This is usually quick and easy. Then it’s time to tie the warp to the front apron rod. Tension is important now too. Finally, the treadles are attached to the shafts in the order prescribed by the draft. On a floor loom this requires getting on the floor half under the loom. It helps if you are a contortionist.

Then comes the first moment of truth. As you press each treadle and the shafts move you can see if you have it right. Are there any crossed threads? Threads through more than one heddle? It’s a pain, but these are easy to fix…but will require going back, retying and checking the tension again.

At last, the real moment of truth. The first few treadles will tell you if you have threaded each end correctly through the heddles. If there is a mistake in the threading there is no way to fix it without going back and rethreading. If the mistake is at an edge it’s not so bad. If it’s in the middle I recommend a box of kleenex and a cup of tea…or something stronger!

After all the mistakes are fixed and the tears are dried, the actual weaving begins. And it’s fast. I usually spend way more time dressing my loom than actually weaving! Of course attention needs to be taken keep the pattern correct, keep neat selvages and change colour when needed. But compared to the pre-weaving tasks, this is easy!

So now you know the behind the scenes of weaving. That’s how woven fabric is made. And it’s everywhere…the jeans you are wearing, the shirts in you closet, the sheets on your bed. Of course, most of it is done on industrial machines but the principle is the same. And someone still has to man those machines!

Tammy Bast 4/5/19 Tammy Bast 4/5/19

Boucle and Chenille

I hate Monopoly. For me, Monopoly is a long painful process of losing. I lose every time, and you can’t just quit because then you’re a sore looser. I didn’t realize until I was older that the reason I always lost was because I wasn’t willing to take risks. I needed to keep a safe cushion of money back just in case disaster struck (I didn’t cheat either, maybe that was the real reason I always lost)

I live my life pretty much the same way. I take “safe risks”. Risks that if it doesn’t turn out I really haven’t lost anything. Mostly I’m ok with being like that, but sometimes I wonder what I could I do if I took more risks.

Weaving is ones of those places I can take risks. I’ve got nothing to lose and lots to learn. Every failure is really just learning what doesn’t work. So my risk? I bought things I couldn’t feel before buying and had never seen woven in real life. See what I mean about safe risks?!

Chenille is the French word for caterpillar and it describes the yarn well. I bought cotton chenille but it can be made with rayon or acrylic. Essentially it is created by placing short lengths together between 2 strands of core yarn and plying it all together. It doesn’t feel so soft while using it but after washing it is quite lovely. Think about rag quilts. Before washing the raw edges are just…blah. After washing those edges become all fuzzy and beautiful. That’s what happens with chenille.

My dream for the chenille was bath towels for my husband and I. I decided to start with hand towels. And in an effort to set a good example, I sampled, sort of. Well, not really. What I did do was warp for two hand towels. I wove 1 plain weave (my “sample”) then wove a waffle weave for the second. It would have counted as a proper sample if I had cut the first one off, finished it then, based on my results, decided what to do with the second towel. I seriously thought about it. On the other hand, if these are samples before making a big bath towel, then I guess I really did sample!!

I love my chenille towels. The plain weave is very soft, maybe a little thin for a bath towel. I threaded it at 10 epi and wove at about 8 ppi. I’ve heard that chenille has a tendency to “worm” if it isn’t beaten tightly enough so we’ll see what happens over a number of washes. Worming means that a strand of the chenille works its way loose and causes loops to show in the weaving. The waffle weave is very thick, maybe a little stiff. Again it was 10 epi but closer to 15 ppi. I expect with use it will soften up more.

Boucle is yarn that has loops and twirls in it. Again, mine is cotton but in theory it could be anything. (Sometimes I spin boucle yarn by mistake!) I had heard that cotton boucle can make lovely bath towels but I really didn’t believe it. I like a really thick towel.

Like the chenille, I wove 2 hand towels, 1 plain weave, the other with some weft floats. I used a 12.5 dent reed with 12 ppi for plain weave and 15 ppi for the second. I was right, not thick enough for a bath towel (although my daughter wants a bath towel like the plain weave sample, she obviously likes a really thin towel) However, these are amazing kitchen towels! A tea towel and hand towel set. Or if you travel and need quick(er) drying towels, or towels that take less space in your RV than regular towels these would make a suitable bath towel.

I’m going to hang on to the chenille towels and see if any worming happens and find out how soft they will get. But, the boucle towels are ready for a new home. They would make a fabulous wedding gift, housewarming present or something special for your kitchen. If you are interested, click on Products in the menu at the top of the page.

Tammy Bast 3/29/19 Tammy Bast 3/29/19

The Importance Of Play

Today it’s just about fun! I’ve just come off a couple of weeks of working hard at weaving or weaving related stuff. I’ve learned how to make videos and upload them, (check out my video tutorials here https://www.therogueweaver.com/video-tutorials-1 ), I’ve learned how to connect my posts and products to Pinterest, (you can follow my board: The Rogue Weaver), and I’ve finished some challenging projects. I like a challenge so none of it felt like “work” but it took a lot planning, research, organization and focus. Oh, and discipline. Lots of discipline. So this week I wanted to play.

I’ve been thinking about the word play this week. Children play. They “just” play. They aren’t thinking “oh, I need to learn gross motor skills so I’m going to climb a tree”. No, they just climb that tree. It’s there, it’s fun, they can, so they do. They get the exercise, learn the skills, grow and develop, all without ever needing to set goals or schedule “learning sessions.” They have fun learning and it’s not a chore. I think that is pretty awesome!

I’m not very good at playing. I’m not sure I ever was. I think too much: why am I doing this? What else should I be doing? What if it doesn’t work out? What is the purpose? I can turn play into work too: what did I learn? what will I do different next time? what did I do wrong? I’m so good at turning play into work I can even turn other people’s play into work: like the time my homeschooled daughter had a fascination with the human heart and I turned it into an essay writing lesson. In retrospect, she would have had much more enjoyment and learned far more if I had just let her read for fun.

So play becomes work when we impose expectations. I put no expectations on my weaving this week. This week I picked some beautiful Noro yarn and just wove. I planned to plain weave but the yarn told me honey comb. I listened. So beautiful! (I did write a pattern, you can find it here: https://www.therogueweaver.com/new-products/noro-scarf ) Then I put on some cotton slub to try some pick up patterns. I hadn’t used it before, I didn’t know what would happen. If I was trying to produce something to sell, this would not have been a fun project! This slub did not make a good warp! It continually broke. Again and again and again. I don’t know if it was because it was old cotton or if slub just doesn’t make good warp. I’ll try again with new cotton another time. I had fun though. I did 4 little cloths and I love them! Each one has a different pattern and they are sooo soft. Soft enough for baby wash cloths! In my house they are going to be paper towel replacements.

I did learn, but that was a side effect of playing.

Play is important. I’m going to cultivate an attitude of play. I think we all should. Of course there are many things we should do, and some we must do. I know that, and I know that sometimes life is so busy we don’t have time to think about playing. But we should. Play brings joy. And joy fills us and over flows from us. It makes us more tolerant, more accepting, more open to new thoughts and ideas, more aware of when something is wrong and more bold to step forward. So play with your kids with no thought of teaching them, splash in the puddle just because it’s there, climb the tree because you can. Play with no expectations.